The netPIO / FREQ is a comfortable 9-MHz frequency counter.
With additional features, like digital I/O, PWM output, pulse and clock generator and six ADC channels. The module makes it easy to interface digital sensors with pulse output signals, like speedometers, flow sensors, revolution …
The µPIO / FREQ is a comfortable 9-MHz frequency counter with additional features, like digital I/O, PWM output, pulse and clock generator and six ADC channels.
The module makes it easy to interface digital sensors with pulse output signals, like speedometers, flow sensors, revolution counters…
The netPIO / INCR3 can decode positions of three incremental encoders (TTL level).
The encoder signals (A; B) are counted with 32 bit (position) counters. Each of three input channels is equipped with an ENABLE input. Maximum count rate is approx 20 kHz (ratio 1:1). A index signal Z can be …
The µPIO / INCR3 can decode positions of three incremental encoders (TTL level). The encoder signals (A; B) are counted with 32 bit (position) counters. Each of three input channels is equipped with an ENABLE input. Maximum count rate is approx 20 kHz (ratio 1:1). A index signal Z can be used, …
The /PWMIO18 firmware works as PC interface with 18 digital I/O lines.
With adjustable data direction. All I/O lines can generate a 8 bit / 50 Hz PWM signal, as well as blink and pulse signals. Port D can be used to control servo drives. It generates a 50 Hz-PWM-signal with a pulse duration …
The /PWMIO18 firmware works as PC interface with 18 digital I/O lines with adjustable data direction. All I/O lines can generate a 8 bit / 50 Hz PWM signal, as well as blink and pulse signals.
Port D can be used to control servo drives. It generates a 50 Hz-PWM-signal with a pulse …
The USB isolator establishes an electrically isolated link between the computers USB port and the peripheral USB device(s). It protects the computer against external electrical influences that may cause damage or data errors.
The USB isolator transferes the USB data as well as the …