ABACOM netPIO

ABACOM netPIO

 

- 10-MBit LAN interface based on Microchip(TM) ENC28J60
- Two separate controllers for communication and application (2x ATMEGA168-20 with 18.432 MHz clock)
- 6 pin ISP and TEST LED for each controller
- Application controller with 18 I/O lines
- Screw-terminal and pin connections
- 6 inputs + 6 outputs (AUX-Port) in addition on communication controller
- Voltage regulator on board
- Dimensions 70mm x 120 mm (fits into WAGO DIN rail carrier WAGO 288-600)

- Class C, 10Mbits network access required

     Documentation

 

 Download manual and software

 

The netPIO board is available with the functional variations listed below...

Displaying 1 to 9 (of 9 products) view: List viewBlock viewGallery viewThumbnail

 
netPIO / GPIO18
from 69,90EUR
incl. 19% Tax plus 6,80EUR Post-shipping costs

netPIO / GPIO18


In stock - Delivery time: 1-3 working days In stock - Delivery time: 1-3 working days **

  The netPIO / GPIO18 works as interface with 18 digital I/O lines. The data direction for each line is programmable (18 GPIO). I/O lines are combined to ports B, C an D. Each port offers six I/O lines. Port B0…PortB5 Digital I/O
Port C0…PortC5 Digital I/O = ADC 0..5
Port D2…PortD7 Digital I/O In addition voltages at port ...
netPIO / FREQ
from 79,90EUR
incl. 19% Tax plus 6,80EUR Post-shipping costs

netPIO / FREQ


In stock - Delivery time: 1-3 working days In stock - Delivery time: 1-3 working days **

    The netPIO / FREQ is a comfortable 9-MHz frequency counter with additional features, like digital I/O, PWM output, pulse and clock generator and six ADC channels. The module makes it easy to interface digital sensors with pulse output signals, like speedometers, flow sensors, revolution counters, energy meters, light barriers, etc.
  System ...
netPIO / TEMP12
from 79,90EUR
incl. 19% Tax plus 6,80EUR Post-shipping costs

netPIO / TEMP12


In stock - Delivery time: 1-3 working days In stock - Delivery time: 1-3 working days **

  The netPIO / TEMP12 allows you to connect up to twelve digital temperature sensors (type Dallas DS18B20). Data from twelve channels is transferred to your PC via ethernet. ONE temperature sensor can be connected to each of the screw terminals B0…B5 and C0…C5. Channels that are not occupied by temperature sensors, ...
netPIO / INCR3
from 79,90EUR
incl. 19% Tax plus 6,80EUR Post-shipping costs

netPIO / INCR3


In stock - Delivery time: 1-3 working days In stock - Delivery time: 1-3 working days **

   The netPIO / INCR3 can decode positions of three incremental encoders (TTL level). The encoder signals (A; B) are counted with 32 bit (position) counters. Each of three input channels is equipped with an ENABLE input. Maximum count rate is approx 20 kHz (ratio 1:1).  A index signal Z can be used, if available from the encoder. The board is also useful for general ...
netPIO / PWMIO18
from 79,90EUR
incl. 19% Tax plus 6,80EUR Post-shipping costs

netPIO / PWMIO18


In stock - Delivery time: 1-3 working days In stock - Delivery time: 1-3 working days **

    The /PWMIO18 firmware works as PC interface with 18 digital I/O lines with adjustable data direction. All I/O lines can generate a 8 bit / 50 Hz PWM signal, as well as blink and pulse signals.   Port D can be used to control servo drives. It generates a 50 Hz-PWM-signal with a pulse duration of1..2 ms for that purpose.Servo and ...
netPIO / ANDROID APP for free

netPIO / ANDROID APP for free

  This ANDROID-APP for our netPIO modules is available for free. It can be used on mobile ANDROID devices (2.2 or higher).    For convenient mobile installation use  Google Play.   In addition we publish the JAVA / ANDROID source code of the APP. Java programmers can use the ANDROID-SDK (Eclipse) to modify or extend the app in any way they like. Please ...
netPIO / CLEAR
from 39,90EUR
incl. 19% Tax plus 6,80EUR Post-shipping costs

netPIO / CLEAR


In stock - Delivery time: 1-3 working days In stock - Delivery time: 1-3 working days **

  netPIO / CLEAR  Here we offer our netPIO board fully assembled, but WITHOUT ANY FIRMWARE. Developers can use the the netPIO hardware as a platform for their own applications.
The Ethernet interface is based on a MicroChip ENC28J70 chip can be controlled via SPI(SPI1) from a soldered ATMEGA168-20 ...
Network patch cable, 2m, blue
3,99EUR
incl. 19% Tax plus 2,80EUR Post-shipping costs

Network patch cable, 2m, blue


In stock - Delivery time: 1-3 working days In stock - Delivery time: 1-3 working days **

This item was added as accessory for the following items:   ABACOM netPIO products TERACOM TCW products
Network patch cable, approx. 2m, blue
DC power supply for netPIO
6,90EUR
incl. 19% Tax plus 2,80EUR Post-shipping costs

DC power supply for netPIO


In stock - Delivery time: 1-3 working days In stock - Delivery time: 1-3 working days **

This item was added as accessory for the following items:   ABACOM netPIO products  
DC power supply (Europe) 110 ... 240 V AC 9V / 1A DC  

Displaying 1 to 9 (of 9 products)

ABACOM netpio products

You have 0 items in your shopping cart.

Currently 0 items are on your Wish List.

New customer? Forgot Password?

WorldPay allows easy and secure credit card payment.

Customers with PayPal account can use this well-known service.