The µPIO / INCR3 can decode positions of three incremental encoders (TTL level). The encoder signals (A; B) are counted with 32 bit (position) counters. Each of three input channels is equipped with an ENABLE input. Maximum count rate is approx 20 kHz (ratio 1:1). A index signal Z can be used, if available from the encoder.
The board is also useful for general count jobs (e.g. parcels on a conveyor belt). Each of the three counters offer CLOCK, UP/DOWN, ENABLE and RESET inputs. Software load and reset is possible as well.
In addition the device offer five general purpose digital IO´s and a adjustable clock output (35 Hz...9kHz in 255 steps) valuable for test and service operations.
A free application software is available to control the device, allowing simple data readings through DDE.
- XP, Vista, WIN 7/8, 32/64 Bit
Documentation and driver...
ProfiLab Expert 4.0
Optional: Modul enclosure without / with flange
Optional: USB cable , 1,8m, black