USB-µPIO / TEMP12

 

The μPIO / TEMP12 allows you to connect up to twelve digital temperature sensors (type Dallas DS18B20). Data from twelve channels is transferred to your PC via USB. ONE temperature sensor can be connected to each of the screw terminals B0…B5 and C0…C5. Channels that are not occupied by temperature sensors, can take over alternative functions:

 

The device is delivered with a configuration software, which allows you to setup each channel. The configuration is transferred to the device and stored temporarily or permanently. So the device can work as PC interface as well as in a stand-alone application.A “HIGH” sense limit and a “LOW” sense limit can be configured for each analogue channel (temperature or sensor). If a channel value gets classified as HIGH or LOW, this can trigger an depending alarm output. For example a cooler could be activated if a temperature channel indicates “HIGH”. Channels that exceed its limits are also indicated on an optional LCD display. A standard LCD text display (HD44780) with 4x20 characters can be connected on Port D. Other display formats are NOT supported. The display will show value and status of all channels automatically. See datasheet for further information.

 

System requirements 

 

• WIN XP/7/8/10, 32/64 Bit

 

 

 

 

RealView example for 12 temperature channels

 

Optional: DS18B20 Temp. Sensors

 

Optional: LCD 4x20

  

 

Optional: Modul enclosure without / with flange

 

 

Optional: USB cable , 1,8m, black