- OPC Client read: "Bad Quality Item" values now read 1E-12.
- Modulbus SERAI 6-10: Improved synchronisation
08/29/2017
- Improved TAB-order in dialogs
- Fullscreen-mode now with <CTRL-F11> intead of <F11> (because of double occupancy)
04/20/2015
- Hardware: Phigets Temperature Sensor added.
12/18/2014
- Multimeter VA18B - Update for new device version
06/06/2014
- LabJack U6: Adjustable range for analogue inputs
04/02/2014
Modbus client added.
01/29/2014
- Multimeter PeakTech 3430 added (on COM: uses USB VCP)
- User Interface: Channel separator now adjustable.
12/17/2013
- USB-µPIO/netPIO/TEMP12 reviewed.
07/03/2013
- New hardware: ABACOM netPIO products
02/21/2013
- No connection to DMM VC870 via USB cable. Solved.
01/30/2013
- Themometer PCE-T390 added.
08/16/2012
- Improved recording and displaying of the first recorded value in slow sample-rates
08/03/2012
- Bug with logging-function and english windows-versions fixed.
06/07/2012
- Multimeter UT70D: No connection with older devices. Solved.
05/15/2012
- µPIO/Temp12: Sometimes loses connection on config upload. Solved.
04/17/2012
- Bitmap export to the clipboard improved
03/09/2012
- Hygrosens temp./humidity sensor: USB version now supported
02/13/2012
- UT61E fifferent versions available on market.
12/20/2011
- New hardware: PCE-910 Manometer
11/23/2011
- Improved display while using "big fonts"
11/09/2011
- WIN7/x64 Driver Update (KOLTER, WASCO, ...)
07/12/2011
- New DMM: UT61E USB/COM
07/04/2011
- DMM UT-803 reviewed
- ABACOM USB-ADC: Support for 4x PT100
- ABACOM USB-µPIO /TEMP12 prepared
01/31/2011
- New hardware: ABACOM USB-µPIO /GPIO18
- New hardware: ABACOM USB-µPIO /INCR3
01/26/2011
- ModulBus AD210: No connection in some cases. Solved.
01/13/2011
- New hardware: ModulBus AD210
10/27/2010
- New Hardware: ABACOM µPIO / FREQ frequency counter
09/09/2010
-New hardware: LabJack U6
08/03/2010
- Keep channel-assignments if changes on the hardware is made
07/08/2010
- bmcm LibadX driver supported
06/09/2010
- Voltcraft VC830, 850, 870 at COM and USB
04/19/2010
- Problem with disappearing curves in big zoom-levels solved
- Improved behaviour of scrolling in the channel panel
04/09/2010
- Improved clipboard copy
- New hardware: BK PRECISION 1856D Frequency Counter
03/31/2010
- Improved display of the time axis
02/09/2010
- New hardware: ABACOM USB-ADC
01/26/2010
- New DVM: Uni-Trend UT803, UT70D, UT70B
- Serial devices up to "COM99" available.
10/27/2009
- New hardware: bmcm USB-AD16f
10/13/2009
- New hardware: Greisinger EasyBus devices ('GetValue' function only)
10/12/2009
- OPC read client: Now processing boolean items.
08/11/2009
- LabJack "Ungültige Gleitkommaoperation" message using more than one LabJack device. Solved.
- Improved display for "heartbeat-mode"
07/22/2009
- New hardware: H-Tronic HB627 (8 channel ADC; 12 Bit; 4,095 V)
- New hardware: H-Tronic HB628 (8 channel ADC; 12 Bit; 4,095 V + 8 Dig.OUT)
06/17/2009
- New hardware: Pollin AVR-NET-IO
- New: OPC DA2 read client
05/29/2009
- DMM setting not saved correctly - bug fixed.
04/09/2009
- Scrolling in the channel-list possible
- Numeric display refresh irrespective of the sample rate
03/16/2009
- Wrong display of the time-axis in pause mode - solved
02/09/2009
- Improvements in the data export:
-> Offset in seconds >999999 not in exponential format
-> Suppress of redundant (equal) rows
01/28/2009
- Display of curves in "heartbeat-mode" improved
12/16/2008
- Start/Stop-function for ALL plotters simultaneous
- Renaming of device names
11/11/2008
- Sometimes the X-scale was not updated while zooming - solved
- The min-max display was sometimes not visible in the 1. channel - solved
19/23/2008
- H-TRONIC Bluetooth Interface