01/19/2016
- Quancom API: "Quancom Special Command" added.
07/22/2015
- Deditec API: "DELIB Special Command" added.
04/20/2015
- Phidgets Temperature Sensor reviewed.
12/18/2014
- Multimeter VA18B - Update for new device version
12/10/2014
- DEDITEC: Deditec API 2.02 reviewed.
- Macros disabled after front panel dialogue. Solved.
- ASCII display / file-read memory leak closed.
10/14/2014
- Examples for Horter&Kalb I²C interfaces
- New component "COM Request/Response"
- New component "$Bytes"
06/06/2014
- LabJack U6: Adjustable range for analogue inputs
05/05/2014
- New hardware: Teracom TCW240B
04/02/2014
- Email TLS encrytion added.
- Help files reviewed.
- New Modbus Client.
- PeakTech 3430 added.
- Phidgets Advanced Servo added.
12/16/2013
- USB-µPIO /TEMP12 reviewed.
- Power-On-Reset reviewed.
- $ReadLine: EOF inverted
09/24/2013
- Phidgets hardware reviewed. (Requires Phidgets library21 2.1.8)
- New hardware: Phidgets Spatial Sensor 3/3/3
- LED sensor outputs reviewed.
08/22/2013
- Improved keyboard handling with webbrowser component
- 'Gleitkommafehler' floating point error debugged.
07/03/2013
- New hardware: ABACOM netPIO products
04/03/2013
- No connection unsing TC-TEC devices. Solved.
12/18/2012
- Error message "Kithara-Software" under Windows 8. Solved.
- Receive hotkey: Missing initialisation for inverted output. Solved.
- New hardware TCW181B
10/31/2012
- New hardware:
Teracom TCW112 network controller
Teracom TCW122 network controller
Voltcraft PSP 1405 power supply
Voltcraft PSP 1803 power supply
Voltcraft PSP 12010 power supply
10/24/2012
- Devices from BMC must use BMC LibADX drivers.
http://forum.abacom-online.de/phpBB3/viewtopic.php?f=20&t=2865
07/12/2012
- ARDUINO examples for serial communication added
- DEDITEC API: Adjustable wait time after API call (Request Delay)
06/07/2012
- Multimeter UT70D: No connection with older devices. Solved.
05/15/2012
- New hardware: ELV USB-BAT with example.
- TCP-client/Server: Message "Connection reset by peer" removed.
- Webserver: More stable connection. Please install update for Webserver as well.
- µPIO/Temp12: Sometimes loses connection on config upload. Solved.
- Velleman K8061: Latest API-DLLs added.
- Deditec components: Timing changed.
03/12/2012
- Hygrosens temp./humidity sensor: USB version now supported
02/13/2012
- New hardware: TOP16 UDB PWM IO
- UT61E different version on market
- Modbus TCP problem since update 01/18/2012 solved
01/18/2012
- Calculation bug in component "Formula" fixed.
12/20/2011
- New hardware: PCE-910 Manometer
- New hardware: USB relay board "Super-4"
- High Baudrates for COM and ModbusRTU
- Modbus/TCP: Improved error checking.
11/23/2011
- New hardware: Teracom TCW121 with example
- New SNMP Enterprise ID for Teracom devices
- IO Warrior 24/40: Input read reviewed
- New $CRC component for CRC checksum calculation with example
11/09/2011
- New Hardware: Schmidt EDTL DIGITAL MODULE
- WIN7/x64 Driver Update (KOLTER, WASCO, ...)
07/12/2011
- New DMM: UT61E USB/COM
- New hardware: LAN Relay Box TCW180B
05/12/2011
- Examples added for PoLabs Pokeys56e (Modbus TCP)
- Support of four PT100 with ABACOM USB-ADC
- New ABACOM USB-µPIO/Temp12
- DMM UT-803 reviewed
- Velleman K8000: Card no. not saved. Solved.
- Missing '' in Compiler target directory. Behoben.
- Obsolete hardware marked.
01/13/2011
- New hardware:
ModulBus AD210
ModulBus WR64
ModulBus RD30
ModulBus Relay Interface
12/01/2010
- New hardware:
Teracom TCW110 LAN Interface
Teracom TCW120B LAN Interface
10/13/2010
- Email component: Several recipients separated with ";" from $Input
- New hardware:
ABACOM USB-µPIO / FREQ 9-MHz-Frquenzzähler
ABACOM USB-µPIO / GPIO18 18 Digital-IO; davon 6 mit ADC
ABACOM USB-µPIO / INCR3 Drei Zählerkanäle u.a. für Inkrementalgeber
09/09/2010
- New hardware: LabJack U6
- New hardware: DEDITEC devices (DELIB function library)
06/09/2010
- Voltcraft VC830, 850, 870 at COM and USB
- Correction table: Value pair import from CSV textfile.
- Data recorder and Table now with up to 64 channels.
- Port read/write repaired
04/07/2010
- Meihaus IDS: Timing for USB IDS device
- Corrupt Z order (frontpanel)
caused by update from 03/31/2010. Solved.
03/31/2010
- New hardware: BK PRECISION 1856D FREQ. COUNTER
- Meilhaus IDS (Intelligent Driver System) for Meilhaus PCI cards
- Front panel with macros accelerated.
- bmcm AD-16f: Examples modified with counter request.
03/10/2010
- Stop watch crashes after 10 hours. Solved.
- INI file overwritten by update. Solved.
- COM ports up to COM99
02/09/2010
- New hardware: ABACOM USB-ADC
- DLL IMPORT: Adjustable number of pins with example
01/26/2010
- Pen plotter: Problem switching between front panels solved.
- ModBusTCP: System power reduced.
- System power reduced in "SLOW" mode for some hardware.
- New hardware: Quancom QLIB with example for USBOPTO64IN.
- New DVM: Uni-Trend UT803, UT70D, UT70B
- Up to "COM99" available for serial devices.
12/15/2009
- New hardwate: ABACOM USB-LRB, 8 channel relay board
12/01/2009
- New: Webbrowser (Internet-Explorer) as front panel element.
- DDE server does not update values. Solved.
- Macros reviewed.
- Stripes on stop watch visualisation. Improved.
- Stop component accidentiacally closes wrong window. Solved.
- Hygrosens temperature system: Fixed channel assignment by DS1820 chip ID.
11/06/2009
- Front panel: Fullscreen and runt-time options reviewed.
- Missing compiled DLL´s in DLL examples added.
10/27/2009
- New hardware: bmcm USB-AD16f with example
- Vellman K8000 now addressed by port address
- ShellExecute with string parameters.
- Toradex Inclination sensor (PID 4) now recognized.
10/06/2009
- New hardware: ELV CSI 8 "Computer Switch Interface"
- Decimal point representation now depending on Windows setting
(Locale decimal separator)
08/27/2009
- Printing front panels: Bug with more than one FPL solved.
- "FRONT PANEL ACTIVATE" allows automatic front panel printout.
07/22/2009
- New hardware: H-Tronic HB627 (8 channel ADC; 12 Bit; 4,095 V)
- New hardware: H-Tronic HB628 (8 channel ADC; 12 Bit; 4,095 V + 8 Dig.OUT)
- New hardware: ABACOM USB-DAC (2 channel DAC; 12 Bit; 4,095 V) (Sept.09)
- Improvements pasting front panel controls.
05/29/2009
- AVR-NET-IO: Power consumption reduced.
- String-/Numeric input: Cursor not visible. Fixed.
- $Info: CPU load added.
04/27/2009
- No connection with DLP-IO8G. Problem solved.
04/15/2009
- Problem on termination of compiled projecs solved.
04/01/2009
- New hardware: Pollin AVR-NET-IO
- OPC Write Client: Writing string items now possible
- OPC Write Client: List index error bug fixed
- Table: Old entries are removed if entries exeed capacity (30000 entries)
- Front panel controls: cut/paste reviewed.
03/17/2009
- Problem with front panel Z positions solved.
11/17/2008
- WebServer connection breaks (while recording with y(t) plotter). Solved.
10/28/2008
- Wrong z-position of front panel element. Solved.
- Wrong background color in web browser. Solved.
10/24/2008
- WebServer support and demo
New Hardware:
- Multimeter Benning MM-10
- Meilhaus RedLab TEMP/TC-AI
- LabJack U3: Example for -HV / -LV Version
- H-TRONIC Bluetooth Interface
04/08/2008
New Hardware:
- ChromoFlex (www.xeroflex.com/)
- Trumeter Panel Meters DPM812 and DPM822 (www.trumeter.com)
- DLP-IOR4 relay board (www.dlpdesign.com)
- Toradex Oak Sensors (www.toradex.com)
02/11/2008
- New hardware: DLP-IO8-G USB interface with example
- New hardware: CH341A USB interface chip with example
- Formula/Math:
Integer function result for neg. arguments now correct
02/04/2008
- New hardware: ABACOM USB relay board
- New hardware: IO-Warrior 56
- IO-Warrior: Latest driver DLL adapted.
- Modbus/RTU components
12/11/2007
- Error message on termination. Problem solved.
- PDF info for EasyBus added.
11/22/2007
- Modbus/TCP: Automatic prevetion of over-clocking.
Examples for ACROMAG 9xx-4xxx modules.
11/13/2007
- Support of EASYBUS devices
- New file "ReadLine" component
- I²C (LPT) reviewed
- Examples f. MicroChip PKSERIAL I²C demo board and EEPROM on LPT
- Example PWM on LPT
- "For...To...Next" macro with example
- String parametern for user programmed DLL´s.
- Accelerated wire optimization.
10/17/2007
- Program termination reviewed.
- Example f. Sollae Systems CIE-H10 (Modbus/TCP; http://www.eztcp.com)
10/05/2007
- New: Modbus/TCP Client functions
with examples for "Damocles" and "Poseidon" from www.hw-group.com
- ELV-IO88: No connection / Error on terminating compilation. Solved.
- Velleman K8000: Improved timing using more than one card.
- Send COM: Problem changing prefix and suffix solved.
- ProfiLab TCP reviewed.
08/14/2007
- ELV weather sensors (indoor sensor, pressure hPa) corrected.
- Compiled project doesn´t remember settings. Solved.
08/13/2007
- Problem with Update vom 08/09/2007 solved.
(SLOW not working; Problem closing compilations)
- New hardware: Quancom USBOPTO8(LC)
08/09/2007
- New hardware: ABACOM USB-OUT9
- Problems on program termination fixed.
07/31/2007
- New hardware: Meilhaus RedLab PMD 31xx Series
- VC1008 produces wrong values. Filter integrated.
- Possible problem opening virtual COM. Solved.
- LabJack U3: Improved ADC accuracy with deactivated DAC1.
06/21/2007
- New hardware: Velleman K8061
06/19/2007
- New hardware: Data Translation USB DAQ modules
- Problems on program termination fixed
05/07/2007
- New DMM: V&A VA18B USB (virtual COM)
- New DMM: VC1008 (DMM mode only)
04/10/2007
- New hardware: ELV UDA7 USB DA CONVERTER
03/28/2007
- New hardware: Meilhaus RedLab RL5201
- New hardware: Meilhaus RedLab RL5203
- DLL import: Example source for Dev C++ Open Source Compiler
08/03/2007
- Update for Windows Vista
- Example: Micro ServoBoard f. 8 servos @RS232 (www.robotikhardware.de)
- Example: Mediaplayer as round instrument with short tutorial.
- Example: Excel macro for direct recording to Excel data sheets via DDE.
- Example: Garvens scales (S-Series) @RS-232.
- Problems with '.' as decimal seperator solved.
- Joystick extension (GamePad) with example
- RS232: Problems sending/receiving strings containing chr$(0) solved.
- RS232: Dialogues reviewed
02/05/2007
- New hardware: Voltcraft IR-365 RF thermometer
- Multimeter VC608: No connection over USB-to-RS232 converter. Solved.
- TCP connect pin: No function in digital mode. Solved.
- Email-Client: Target addresses are not saved. Solved.
- Controllers: DT1 added.
- Improved DDE handling
- Example "Clock signals and PWM from RS232" added.
- Title window remains open in background. Solved.
- Serial port higher COM9. Problem solved.
- Command line parameter /RUN added.
01/16/2007
- New hardware: ELV SLA 1 gauge display
- Example/Macro for IR2PC.COM RC5 IR remote control receivers
01/09/2007
- New hardware: Meilhaus PMD-1408FS
- Improved file-open dialogues
11/14/2006
- New component "I²C Master"
- Improved time sharing in case of more than one PMD-1008
10/19/2006
- New components: JUMP and JUMP (Destination)
- Examples for MESSCOMP WASCO PCI cards (messcomp.com)
10/11/2006
- New hardware:
- BMC iM-AD25a
- BMC LibadX: Library for all BMC devices that support LibadX
- Multimeter VC940: Decimal bug in range "Watt" fixed.
- Email-Client: Problems with variables ($P10 and higher) solved.
09/29/2006
- New hardware devices:
- BMC USB-PIO
- HygroSens weather station
- Inversion of digital hardware pins now possible.
- Wrong component pinout (RS-232) after paste via search function. Solved.
- Crash with "show pin status" in combination with with macros. Solved.
08/25/2006
- Y(t) plotter: Time base in toolbar with hotkeys
- New hardware: Port access to MESSCOMP WASCO PCI cards (messcomp.com)
- Clocks/Meter appear with black background. Solved.
- No connection with Multimeter VC6x0. Solved.
08/09/2006
- New hardware:
Conrad(191028-62)/H-TRONIC(1191028) USB module 8 channels 10 bits
- Possible "EscComFunctionError(6)" with Kolter VModuls. Solved.
- Internet update/"Automatic notification" now saved.
08/07/2006
- LabJack UE9: Timer and counter functions added.
- ELV weather sensor/remote control FS10 S8 with example
- Week/Day timer: Seconds only adjustable to 23. Solved.