• Welcome to our ABACOM-Shop
  • Electronic-Software
  • Hardware
  • Free demoversions and updates
  1. Mainpage
  2. UPDATES & SERVICE
  3. SERVICE UPDATE FOR SPRINT-LAYOUT 6.0

SERVICE UPDATE FOR SPRINT-LAYOUT 6.0

 
  Download free service update for Sprint-Layout version 6.0.
 
 

Date: 03/19/2024

 - Rare error "Decimals and thousands separator must differ" when starting the program - fixed
 - Rare error in DRC check - fixed
 
*** Use this update only on an already installed version of Sprint-Layout 6.0 **
 
 
History:
 

03/05/2024

 - Error message in the print preview when defining own colors - fixed
 - TEXT-IO expanded (SOLDERMASK CUTOUT)
 

02/14/2024

 - Tabs can be sorted with drag+drop
 - More modern file dialogs (new compiler)
 

07/08/2022

 - Increased internal resolution of text angle
 - Calculation of the center point of a component when rotating/mirroring now without component texts
 - Text-IO: When importing, "HATCH_AUTO=true" is now the default value
 - Text-IO: Import and export now with new field "NAME=xxx" -
 

05/12/2022

 - Selection of overlapping elements improved
 - Fixed taking of setting values (track, pad, SMD pads, free punch offset).
 - The defaults are now only changed if no element is selected (or by double-clicking).
 

04/28/2022

 - Inaccuracies when rotating circle rings (centre) - fixed
 - Track width "0" can now also be included in the favorites list
 - Text height now with 2 decimal places
 - Improved "Align text" function in the Component dialog if ID or VALUE is not visible
 - Improved Gerber import
 

02/09/2022

 - Very small circle segments were sometimes not displayed - fixed
 

10/11/2021

 - Internet-Updater improved
 

08/02/2021

 - Improved behavior of the automatic display of elements when selecting in the selector or in the component list
 - Fixed limitation of center point coordinates in the properties of a circle
 - Option "Component ID and value always readable after rotating" in the General Settings was not saved - fixed
 

05/26/2021

 - Internal Internet-Updater improved
 

02/16/2021

 - Plugin support
 - Automatic Gerber- /Excellon-Export (console mode)
 

01/19/2021

 - New file extension *.xln for Excellon-drillfiles
 - Bug in the SELECTOR with negative texts on the automatic-ground-plane fixed
 - Improved Gerber-Export  (hatched zones on the automatic-ground-plane)
 - New function: A single board (tab) can now be saved to a new file
 - Fixed a little bug with displaying connection-lines after using the alignment function
 

02/11/2020

 - Import of bigger Gerber files possible (up to 8 MB)
 - Improved drawing of big polygons
 

10/24/2019

- TEST function in big layouts improved
 

08/05/2019

 - Improved behavior of only partially marked components
 

07/31/2019

 - Selected cutout-areas in the automatic groundplane now keep their selection if change the layer
 

07/17/2019

 - Gerber-Export improved (no space-characters in %ADD... command)
 

01/08/2019

 - Possible error message in the print-preview if using big polygones (areas)
 

07/09/2018

 - Possible error message if using big polygones (areas)
 

06/12/2018

 - Exported filenames now contains also the boardname (if more than 1 board exists)
 - Gerber-Export of the board-outline can now contain optional the board-frame (board-size)
 - Special-form "Spiral" is now adapted for big boards
 

03/22/2018

 - Gerber-import improved
 - Name of elements will be shown while routing
 - Improved display of 1/2 grid with SHIFT
 - Improved Text-IO - Export for marked elements
 

10/25/2017

 - Gerber-import improved (comments G04)
 

09/20/2017

 - DRC improved
 

08/29/2017

 - Gerber-import improved (parameter)
 

07/04/2017

 - Invisible layer keep status while saving in the Photoview mode
 - Text input from 50 to max. 99 characters increased
 

04/24/2017

- Possible graphic bug with circle segments in the photoview - solved
 
03/02/2017
- Capturing of element size-parameters improved

01/20/2017
- Gerber-export improved

11/16/2016
- Possible "hung" if saving macro - solved

11/10/2016
- Saving of macros on network drives improved

10/28/2016
- Capturing of element size-parameters altered to double-click function
- Gerber-Import improved (circle segments)

09/06/2016
 - TEST function improved

07/05/2016
 - Component-List sometimes not synchronized - solved

06/15/2016
 - Possible error "Listenindex..." - solved

06/06/2016
 - Possible error when exporting drill data (missing drills) - solved

06/02/2016
 - TEST function improved

05/23/2016
 - Improved printout of zones with outline width = 0

04/18/2016
 - Possible error "merger" of 2 components when duplicate - solved

03/31/2016
 - TEST function for SMD-Thermal-Pads improved

03/30/2016
 - Function "Adjust to grid" now works with rubberband-connections
 - (Text-IO) bug with boolean variables solved

02/16/2016
 - COMPONENTS and GROUPS are added to the Import-/Export filter for textfiles (Text-IO)

02/09/2016
 - CONNECTIONS are added to the Import-/Export filter for textfiles (Text-IO)

09/07/2015
 - Show delta coordinates when duplicating

08/27/2015
 - Rounding-problem when rotating fixed
 - Disturbing messagebox "Tracks are joined" removed
 - SHIFT sets 1/2 grid when moving with cursor keys

07/14/2015
 - Gerber-Import improved

06/01/2015
 - Offset-error in printing the "scanned copy" solved

04/08/2015
 - Data-check after loading a file for "orphaned" component-id's

02/26/2015
 - Show origin of comonent only if pick+place data is used
 - Photoview improved (circles in x-ray mode)
 - Calibration factors for the printout willl be saved now

02/19/2015
 - Show scanned copy in the background "Exclusive" while automatic groundplane is active - solved
 - SMD-Pads were covered of hatched areas on the printout - solved
 - Performance of the DRC improved
 - Performance of the graphic-engine improved

01/15/2015
 - Gerber-Import improved

05/27/2014
 - Bug in drill-export with overlapped drillings (Excellon/HPGL) fixed

03/10/2014
 - Gerber-Import improved (internal gerber-macro "rectangle-centered")

02/26/2014
 - Test function improved

02/20/2014
 - DRC improved
 - Faster loading from files on network drives

02/11/2014
 - Gerber-Import: Rare problem with segments solved

01/21/2014
 - Isolation-milling: "Create all drillings with milling cutter" improved

01/08/2014
 - Gerber-Import improved

12/16/2013
 - Printout-bug (stretched points) - solved
 - Isolation-milling enhanced

12/10/2013
 - Rare bug in the autorouter solved (with non-visible identifiers of components)

11/19/2013
 - Improved behaviour of "flat" track-endings (view, print, export)
 - Error message on doubleclick in the component-list (Listenindex -1) - solved
 - Improved displaying of self-overlapping polygons

10/16/2013
 - Improved behaviour if high DPI settings are used (windows)
 - Error message "Unsichtbares Fenster kann kein Fokus erhalten" on calling the Component dialog - solved

10/10/2013
 - Gerber-Import: Excellon-Import improved (Decimal)
 - Gerber-Export: Improved output of redundant data

08/15/2013
 - Fixed a bug if load multilayer boards

07/02/2013
 - Isolation-milling of complex structures improved
 - Strange behaviour of thermal-Pads in macros solved

06/05/2013
 - Increased accuracy for converting from mil to mm and vice versa

04/24/2013
 - Test-/DRC-function with thermal-pads improved
 - Improved printout of cutout-areas

04/11/2013
 - Gerber-Import: Excellon-Import improved
 - New option: Zones as restricted area in the soldermask
 - Tilde "~" character defined

03/15/2013
 - Improved printout of automatic groundplane and elements with no distance to the groundplane
 - Improved display of colored scanned-copies (background-bitmaps)

03/11/2013
 - DRC improved
 - Missing drills in the Excellon export - solved

03/05/2013
 - Clipboard-function in the print-preview improved
 - Problem of printing layout files in deep path-structures - solved

02/27/2013
 - New Import-/Export filter for textfiles (Text-IO)
 - Isolation milling improved
 - Textfile of the joblist (isolation-milling) now includes the milling width
 - Internal layer names of the Gerber files (%LN...) corrected
 - Disable of the automatic-capture mode with CTRL+SHIFT

01/29/2013
 - Rare error message if switching from mm to mil solved
 - Gerber-Export of circle segments improved
 - Isolation milling improved

01/23/2013
 - Isolation-milling: New option "Create separate files for each job"
 - Gerber import improved (polygon-aperture)
 - DRC improved
 - Test function improved

01/16/2013
 - Disintegrating of components if older layout files were imported - solved
 - Improved text format options for ID and VALUE of components

12/21/2012
 - DRC improved

12/17/2012
 - Create new text-label bug fixed
 - Printout of thermal-pads improved

12/14/2012
 - Some minor bugfixes

12/13/2012
 - Rare printing-problem with too thin tracks solved

12/12/2012
 - Isolation-milling improved
 - Print-function improved
 - New option for the position of the coordinate origin in the General-Settings

12/10/2012
 - Improved editing of the soldermask
 - Print-function improved
 - Gerber-Export for inverted masks corrected
 - Gerber-Export bug in thermal-pads (with individual layer settings) solved

11/22/2012
- F9 changes active copperlayer C1/C2
- F11 changes active layer to S1-S2-O

11/13/2012
- Excellon-export improved

11/09/2012
- Handling with cutout-areas improved

11/07/2012
- Editing of the soldermask improved

11/05/2012
- Autorouter improved
- Gerber/Excellon-Import improved

10/31/2012
- Bug in the milling-function of the board-outline with circles/segment fixed

10/30/2012
- TEST-Function and DRC improved
- Bug with vanished Windows-Controls (ALT-key) solved

10/23/2012
- Several little bugfixes ans improvements

Be the first to review this product.

...